Door Skin repair
The lower part of the doors is a typical rust point on all cars. My Land Cruiser 40 is not different. Luckily you can...
Restoring a Land Cruiser 40 windshield frame
An un-restored 40 without rust at the bottom of the window frame does not exist unless it has been used exclusively in a dry...
Painting and rust protection
Painting has a reputation for being difficult, and it is in a way the most important work you do. No matter how nicely you...
Welding sheet metal
This writeup is a guide to some common problems you encounter when welding and do steel work on cars. The focus is on the...
Overland build – SUV
To get started with overlanding you really don't need any special interior, but after going on some trips you see the benefit of some...
Restoring Land Cruiser 40 Ambulance Doors
The doors of a Land Cruiser 40 are prone to rust, especially in the bottom. Fortunately, there are welding parts to buy. I bought...
Land Cruiser 40 disc brake restoration
Before starting the resto I struggled a lot with adjusting the 40’s drum brakes. And they did not work very well either. So high...
Fluid Film rust protection
Most cars used in wet or snowy areas have some kind of under body treatment in the form of Tectyl, Mercasol or similar that...
Turbo, EGT and intercooler in a 1HZ Troopy
More about the Troopy; improved brakes, cruise control, interior build: land-cruiser-78
The 1HZ engine of the Land Cruiser Troopy is not known for power with...
Intercom unit for overlanding and offroad
There is a lot of noise in a Land Cruiser. And when driving on bad roads or off-road, it is very noisy. When you...
